Siding

themed image
 
 
Navigate

See What Your Home Will Look Like With An Inspire Roofing Product.

 

 

 

Is Your Contractor Licensed

Unlicensed contractors may not meet the standards required for performance or compliance to the various building codes that may be applicable. Poor workmanship and non-compliance can cost you dollars! Are you willing to risk your money? Using an unlicensed contractor may be equated to spinning the roulette wheel!

 

You can take a digital picture of your home, use our image mapper software to plot points on your home, and then upload it to our visualizer tool. The visualizer tool will allow you to see how our products would look when they are installed on your home. To download this software click here.

Please note: File size is 2.33 MB; estimated download is 5 Minutes on 56k Modem, 30 Seconds on Cable/DSL, 15 Seconds on a T1. The installer will check to see if the latest version of the .Net framework is installed, and if not, download it. File size is approximately 22 MB, which would increase the download and installation time to 55 minutes on 56k Modem, 4 minutes on Cable/DSL, or 2 minutes on a T1.

 

 

 


 

Inspire Roofing Products

 

All files are in PDF format.

To view PDF's download:

 

 

 

 

 

 

Inspire

product image

 
Performance
Test Testing Performed Results for
InSpire™ Roofing Products

Fire Rating
In accordance with UL790
Available Class A* or Class C

Hail Rating
In accordance with UL2218
Rated Class 4

Accelerated Ultra Violet Exposure
In accordance with ASTM G154 Xenon Arc Chamber 9,500+ hours
Tile exhibited virtually no fade and with no trace of cracking, spalling or deformation.

Wind Driven Rain / Wind Uplift
In accordance with Miami DADE County TAS 100-95
Up to 110 mph.  No water infiltration through sheathing. No tiles blew off, tore or blew upward.

Freeze-Thaw Cycle
In accordance with ASTM C666C666M
No signs of damage or cracking after 303 cycles.

Water Absorption
In accordance with ASTM C272
No appreciable weight gain.

Water Permeation
In accordance with ASTM E96E96M
Tile shown to be impermeable.

Temperature Cycling
Tiles are subjected to twenty periods of 24-hour cycles consisting of 16 hours in a controlled chamber at high temperatures (150°F), then 8 hours at a cool temperature (-20°F). ASTM D5849
No signs of cracking, curling, deformation, or visible expansion. 
*Contact Inspire Roofing for specific application requirements for UL Class A rated systems.

 
B

 

 

 

 

 

Copyright © 2007.  American Residential and Commercial Construction.  All Rights Reserved.

Home | About Us | Contact